XHT-D08 · SME SERVER ROOM & EDGE INFRASTRUCTURE
Metal Fiber Termination Boxes
Wall, desktop or DIN-rail enclosures for compact fiber termination.
0.8 mm cold-rolled steel · wall / desktop 12–48 fibers · DIN rail 4–12 ports · SC / LC / ST / FC · pre-loaded on request · MOQ 2
Compact metal enclosures for small fiber counts. Wall / desktop boxes come in two depths for up to 24 SC or 48 LC ports; DIN-rail boxes clip inside electrical and control cabinets in 4, 6, 8 or 12 ports. Every unit has a built-in splice tray with bend-radius control and ships empty, with adaptors fitted, or pre-loaded with adaptors and pigtails.
Part 1 · Wall / Desktop Termination Boxes
| Standard — 12 SC / 24 LC, closed & opened |
 |
 |
| Extended — 24 SC / 48 LC, closed & opened |
 |
 |
Part 2 · DIN-Rail Termination Boxes
4-Port
|
6-Port
|
8-Port
|
12-Port
|
All DIN-rail port counts share one compact enclosure size, mount on a standard 35 mm DIN rail and use a cable gland for strain relief.
At a Glance
Form factors: wall / desktop box and DIN-rail box
Housing: 0.8 mm cold-rolled steel, black powder coated
Wall / desktop: two depths, up to 24 SC / 48 LC
DIN rail: 4–12 ports in one common size, standard 35 mm rail
Adaptors: SC / LC / ST / FC (E2K on request), single-mode or multimode, UPC / APC
Pre-load: empty, with adaptors, or with adaptors and pigtails
MOQ / lead: MOQ 2, about 3–7 days; custom builds and volume orders agreed on request
Configuration Options
Step 1 · Form factor — wall / desktop box for room and floor termination; DIN-rail box to clip inside electrical or control cabinets.
Step 2 · Size and ports — wall: Standard (12 SC / 24 LC) or Extended (24 SC / 48 LC); DIN: 4, 6, 8 or 12 ports.
Step 3 · Adaptor and polish — SC / LC / ST / FC, single-mode or multimode; UPC or APC on single-mode; E2K on request.
Step 4 · Pigtail fiber — G.652.D / G.657.A1 / OM1 / OM2 / OM3 / OM4 standard; G.657.A2 / G.657.B3 / OM5 on request.
Step 5 · Pre-load — Empty (enclosure only), Adaptor (fitted), or Pigtail (adaptors plus pigtails, ready to splice).
Step 6 · Labels & packaging — each unit in its own small carton, multiple units consolidated into an export carton; labels and packaging customizable on request.
Typical Applications
• Building entrance facilities and telecommunications rooms where rack space is not available.
• Enterprise office, floor and MDU indoor fiber termination.
• Security, surveillance and building / campus passive optical wiring.
• Industrial automation, control-cabinet and power-distribution termination (DIN rail).
• Building automation, intelligent transport and compact cabinet optical access.
• Boundary: for high-density 19″ rack patching use XHT-D07; for patch cords use XHT-D05 / XHT-D06; for outdoor / FTTH distribution boxes use XHT-A07.
Technical Specifications
| Housing | 0.8 mm cold-rolled steel, black powder coated |
| Wall / desktop — Standard | 260 × 135 × 41 mm, max 12 SC / 24 LC |
| Wall / desktop — Extended | 260 × 135 × 66 mm, max 24 SC / 48 LC |
| DIN rail | 4 / 6 / 8 / 12 ports in one common size 126 × 138 × 36 mm; standard 35 mm DIN rail |
| Cable entry | wall / desktop rear entries; DIN unit fitted with cable gland for strain relief |
| Splice management | built-in splice tray, ordered routing and bend-radius control |
| Adaptor type | SC, LC, ST, FC; E2K on request |
| Operating temperature | -40 °C to +70 °C |
| Standards / compliance | fitted adaptors and pigtails tested per applicable IEC 61300 methods; RoHS compliant |
Quality You Can Verify
• Enclosure formed from 0.8 mm steel with a powder-coated finish and protected edges.
• Adaptors fitted and aligned; pigtails routed on the tray with bend-radius control.
• Adaptors and pigtails tested per applicable IEC 61300 methods; end faces cleaned and sealed with dust caps.
• The ordered port, fiber and pre-load configuration is checked before packing.
FAQ
Q1. Wall / desktop or DIN rail? Wall / desktop for room and floor patching; DIN rail where the fiber terminates inside an electrical or industrial control cabinet.
Q2. What do Empty / Adaptor / Pigtail mean? Empty ships the enclosure; Adaptor adds fitted adaptors; Pigtail adds adaptors and pigtails so the unit is ready to splice.
Q3. Which fiber for the pigtails? G.652.D / G.657.A1 and OM1–OM4 are standard; G.657.A2 / G.657.B3 and OM5 are supplied on request.
Q4. MOQ and lead time? From 2 pieces in about 3–7 days; E2K and other custom configurations, plus volume orders, are quoted on request, and a sample can be arranged.
Ordering & Service
• Part number: XHT-D08-[W/D]-[size/ports]-[adaptor]-[U/A]-[fiber]-[E/A/P]
• Example: XHT-D08-W-12SC-A-A1-P = wall box, 12 SC, APC, G.657.A1, with adaptors and pigtails.
• Example: XHT-D08-D-8P-U-M3-E = DIN-rail, 8 ports, UPC, OM3, empty.
• MOQ 2, about 3–7 days; custom builds and volume orders agreed on request; reply within 24 h.
• Can be supplied as one matched set with patch cords, pigtails and adaptors for a room or cabinet build.
Focus note: We specialize in compact metal termination for small fiber counts — wall, desktop and DIN rail — with optional pre-loaded adaptors and pigtails. High-density 19″ rack patching sits under XHT-D07.
Related Products
• High-density 19″ patch panels → XHT-D07
• LC duplex & uniboot patch cords → XHT-D05 / XHT-D06
• Fiber pigtails → XHT-A02
• Outdoor / FTTH distribution boxes → XHT-A07
Compact metal enclosures for wall, desktop and standard 35 mm DIN-rail termination. Fitted adaptors, pigtails, labels and packaging are confirmed on the order. RoHS compliant.
